Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® T KR 4355 G10 - PA6T/6-GF50 - BASF

Material Data Center offers the following functions for Ultramid® T KR 4355 G10:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultramid T datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性 - Processing Recommendation Injection Molding - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Glass fibre reinforced partially aromatic polyamide for injection moulding. High toughness, stiffness and strength, low water absorption, high melting point (285 °C).
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 0.2 / * % ISO 294-4, 2577
成形収縮率, 直角 0.6 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 18000 / - MPa ISO 527
破壊応力 260 / - MPa ISO 527
破壊ひずみ 2.8 / - % ISO 527
シャルピー衝撃強さ, +23°C 100 / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 14 / - kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 285 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 245 / * °C ISO 75-1/-2
線膨張係数, 平行 18 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 55 / * E-6/K ISO 11359-1/-2
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 1MHz 4.7 / 4.8 - IEC 62631-2-1
誘電正接, 1MHz 200 / 300 E-4 IEC 62631-2-1
体積抵抗率 >1E13 / >1E13 Ohm*m IEC 62631-3-1
耐電圧 33 / 31 kV/mm IEC 60243-1
その他の特性.乾燥/調湿単位テスト基準
吸水率 4 / * % Sim. to ISO 62
吸湿率 0.6 / * % Sim. to ISO 62
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数 130 / * cm³/g ISO 307, 1157, 1628
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 110 °C -
Pre-drying - Time 8 h -
Processing humidity ≤0.15 % -
樹脂温度 310 - 330 °C -
金型温度 80 - 120 °C -
機能
応力-ひずみ. , Ultramid® T KR 4355 G10 (乾燥), PA6T/6-GF50, BASF
応力-ひずみ. , Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
割線弾性率−ひずみ. , Ultramid® T KR 4355 G10 (乾燥), PA6T/6-GF50, BASF
割線弾性率−ひずみ. , Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
応力-ひずみ (等時的). 23°C, Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
クリープ弾性率−時間. 23°C, Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
クリープ曲線 23°C, Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
引張弾性率-温度. , Ultramid® T KR 4355 G10 (乾燥), PA6T/6-GF50, BASF
引張弾性率-温度. , Ultramid® T KR 4355 G10 (調湿), PA6T/6-GF50, BASF
特殊な特性
成形加工法.
射出成形.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 110 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 310 - 330 °C
injection molding, Melt temperature, recommended: 320 °C
injection molding, Mold temperature, range: 80 - 120 °C
injection molding, Mold temperature, recommended: 100 °C
injection molding, Dwell time, thermoplastics: 5 min
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.